1. There is cementation inside the wrong oil feeder, reducing the air circulation rate. Solution: clean the oil feeder.
2. If there is no suitable function for the oil feeder, it is generally caused by the wrong installation of the oil feeder. The installation should be carried out according to the direction of the oil feeder arrow, which specifies the direction of air flow.
3. There are two reasons for excessive lubricating oil in the oil feeder to cause this fault. A. the setting of the oil feeder is not accurate, so the oil mist feeder should be set correctly; B. Excessive amount of lubricating oil is added beyond the marked line. Excess oil should be released
4. The lubricating oil in the oiler is quickly used up. A. o-ring (27) does not play a sealing role, so it needs to be replaced and a new o-ring should be installed; B. the oil feeder should be properly set if it is wrong.
Some of the articles and information on this website are from the Internet. Reprinting on this website for the purpose of transmitting more information and learning does not mean agreeing with the opinions or confirming the authenticity of the content. If reprint the manuscript involves the copyright and so on question, please immediately contact the administrator, we will give the change or the deletion related article, guarantees your right.
